SDSHobby
73IN SBACH 300 CARBON FIBER VERSION 30CC RC MODEL GASOLINE AIRPLANE ARF /PETROL AIRPLANE
| 19*17*750mm ((Optional choice | FP2024)) |
| 8*6*280mm ((Optional choice | FP2006)) |
| High performance hardware including | Ball linkage control system; PU wheels; C.F.Tube; Carbon Landing gear; |
| (suggest item No. | A123-2SFJ, A123-2ST, NH1200-4, NH1500-4, NH1500-5B, NH1500-5A, NH2000-4, NH2000-5) |
Specification:, Wing span:, 1850mm/73in, Length:, 1765mm/69in, Wing area:, 54sq.dm, Engine:, 30CC, Fly weight:, around 4500g, Radio:, 4-6 Channels, Carbon Fiber Roll Tube:, Carbon Fiber Roll Tube:, Equipped Fuel Tank:, 380ml/380cc, Center-of-Gravity Location:, 147mm, Features:, Carbon Fiber accessories:, , Engine:, 30-40cc Gas Engine, Radio:, 4-6 Channels, at least 6 servos,, Propeller:, 18x6, 18x8, 18x10, 19x6, 19x8, 19x10, Spinner:, 3.5inch, Receiver battery:, Power Switch:, twin power switch (one for the receiver, one for the ignition CDI), NOTE:, Because the product is in updating, accessories configuration occasionally a small changes, accessories pictures for reference only, accessories on receipt shall prevail, thanks.,
Light weight construction Latest structure High structural strength Two pieces ...SDSHobby
ĸ‹ÆŽ¶DYNAM 5 CH RECEIVER
| Product Name | Receiver |
| Product Description | 5 CH Receiver |
| Channel | 5 Channel |
| Include BAT | 1.5*2A*4cell |
| Demodulation type | frequency demodulation |
| Intermediate frequencyS | 455KHZ |
| Frequency | 72MHz/35MHz/36MHz/40mhz/ |
| Weight | 8.8g |
| Dimensions | 34*18*10mm |
| Current Drain | 13mA |
| COLOR | Black |
| ANT Length | 100cm |
| Certificate | CE,FCC |
Item:, R5P-D / R5P-J / R5P-F, Type: FM,
This 5 Channel receiver is perfect for Collective Pitch flight. ...SDSHobby
ASP S46H NITRO ENGINE FOR HELICOPTER
| Characteristics | Quiet run |
| Annexed in the supply | Motor |
Product description:, These engines stand for smooth starting characteristics, powerful drive and an unbelievably,
ASP HELICOPTER MOTOR S46H calm running The precisely adjustable carburettor ...SDSHobby
ALUMINUM ANODIZING TRANSMITTER BELLY STAND HOLDER (GREEN)
Features:, Two methods to install the mount on the bottom of transmitter:, Ÿ, With double side tape: If user thinks the strength of the tape supplied with the product is not enough, user can choose more stronger tape as they want.,
Transmitter belly stand is combined with two parts, one is ...SDSHobby
ALUMINUM ANODIZING TRANSMITTER BELLY STAND HOLDER (BLUE)
Features:, Two methods to install the mount on the bottom of transmitter:, Ÿ, With double side tape: If user thinks the strength of the tape supplied with the product is not enough, user can choose more stronger tape as they want.,
Transmitter belly stand is combined with two parts, one is ...SDSHobby
ALUMINUM ANODIZING TRANSMITTER BELLY STAND HOLDER (GOLD)
Features:, Two methods to install the mount on the bottom of transmitter:, Ÿ, With double side tape: If user thinks the strength of the tape supplied with the product is not enough, user can choose more stronger tape as they want.,
Transmitter belly stand is combined with two parts, one is ...SDSHobby
ALUMINUM ANODIZING TRANSMITTER BELLY STAND HOLDER (RED)
Features:, Two methods to install the mount on the bottom of transmitter:, Ÿ, With double side tape: If user thinks the strength of the tape supplied with the product is not enough, user can choose more stronger tape as they want.,
Transmitter belly stand is combined with two parts, one is ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (25A ESC + 2030 12T MOTOR +PROGRAM CARD) FOR 1/18 CAR ON-ROAD RACING CAR/ OFF-ROAD BUGGY
| ESC | EZRUN-25A-Sensorless 1pcs |
| Motor | EZRUN-2030 12T Brushless motor 1pcs |
| Program Card | Digital LEDs Program Card 1pcs |
| Output | Continuous current 25A, burst current 90A |
| Input | 4-9 cells Ni-MH/NiCd or 2-3 cells LiPo |
| BEC Output | 6V/1.5A |
| Resistance | 0.005 Ohm |
| Motor Supported | Sensorless Brushless motor |
| u With 4-6 cells Ni-MH/NiCd or 2 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| u With 6-9 cells Ni-MH/NiCd or 3 cells Lipo | On-Road≥18T, Off-Road≥24T; |
| Suitable Car | 1/16 or 1/18 scale car for sportful race |
| Size | 31.5mm (L) * 27.5mm (W) * 16mm (H) |
| Weight (Without wires) | 23g |
| With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock Crawler mode. |
| Turns | 12T |
| KV value | 7800KV |
| Diameter | 20mm |
| Motor length | 30mm |
| Extend shaft Diameter | 2.0mm |
| Length of extend shaft | 10mm |
| Weight | 46g |
The Combo Includes the Following Products:, Suitable Brushless Motor:, Features for ESC:, Compatible with all sonsorless brushless motor, Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection., Features for Motor:, Aluminum shell (case),
1/18 or 1/16 Ezrun Brushless ESC for Car 25A : ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (60A WATERPROOF ESC +KV4300 9T MOTOR +PROGRAM CARD) FOR 1/10 CAR ON-ROAD RACING CAR/ OFF-ROAD BUGGY
| Multiple protection features | Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. |
The Combo Includes the Following Products:, ESC:, Waterproof EZRUN-60A-Sensorless 1pcs, Motor:, EZRUN-3650M, Program Card:, Digital LEDs Program Card 1pcs, Output Current:, Continuous 60A, burst 380A, Input:, 4-9 cells Ni-MH/NiCd or 2-3S Lipo, BEC Output:, 6V/1.5A, Resistance:, 0.0007 Ohm, Motor Supported:, Sensorless Brushless Motor, Suitable Car:, 1/10 4WD SCT, 4WD buggy/SCT (Include TRAXXAS 1/10 SCT), Size:, 31.5*27.5*24mm, Weight:, 35g, EZRUN-60A Brushless ESC:, EZRUN-3650M 9T Sensorless Brushless Motor for 1/10 Car:, KV Value:, KV4300, Turns:, 9T, Motor Diameter:, 36mm, Motor Length:, 50mm, Shaft Diameter:, 3.17mm, Shaft Length:, 15mm, Weight:, 170g, EZRUN-3650 8T Sensorless Brushless Motor:, Top quality materials:, u,
9T Brushless motor 1pcs EZRUN-60A-SL Waterproof ESC Features for Compatible ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (60A WATERPROOF ESC +KV3000 13T MOTOR +PROGRAM CARD) FOR 1/10 CAR ON-ROAD RACING CAR/ OFF-ROAD BUGGY
| Multiple protection features | Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. |
The Combo Includes the Following Products:, ESC:, Waterproof EZRUN-60A-Sensorless 1pcs, Motor:, EZRUN-3650M 13T, Program Card:, Digital LEDs Program Card 1pcs, Output Current:, Continuous 60A, burst 380A, Input:, 4-9 cells Ni-MH/NiCd or 2-3S Lipo, BEC Output:, 6V/1.5A, Resistance:, 0.0007 Ohm, Motor Supported:, Sensorless Brushless Motor, Suitable Car:, 1/10 4WD SCT, 4WD buggy/SCT (Include TRAXXAS 1/10 SCT), Size:, 31.5*27.5*24mm, Weight:, 35g, EZRUN-60A Brushless ESC:, EZRUN-3650M13TSensorless Brushless Motor for 1/10 Car:, KV Value:, KV3000, Turns:, 13T, Motor Diameter:, 36mm, Motor Length:, 50mm, Shaft Diameter:, 3.17mm, Shaft Length:, 15mm, Weight:, 170g, EZRUN-3650 13T Sensorless Brushless Motor:, Top quality materials:, u,
Brushless motor 1pcs EZRUN-60A-SL Waterproof ESC Features for Compatible with ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (60A ESC +KV4300 MOTOR +PROGRAM CARD) FOR 1/10 CAR ON-ROAD RACING CAR/ OFF-ROAD BUGGY
| Multiple protection features | Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. |
The Combo Includes the Following Products:, ESC:, EZRUN-60A-Sensorless 1pcs, Motor:, EZRUN-3650M 9T, Program Card:, Digital LEDs Program Card 1pcs, Output Current:, Continuous 60A, burst 380A, Input:, 4-9 cells Ni-MH/NiCd or 2-3S Lipo, BEC Output:, 6V/1.5A, Resistance:, 0.0007 Ohm, Motor Supported:, Sensorless Brushless Motor, Suitable Car:, 1/10 4WD SCT, 4WD buggy/SCT (Include TRAXXAS 1/10 SCT), Size:, 31.5*27.5*24mm, Weight:, 35g, EZRUN-60A Brushless ESC:, EZRUN-3650 9T Sensorless Brushless Motor for 1/10 Car:, KV Value:, KV4300, Turns:, 9T, Motor Diameter:, 36mm, Motor Length:, 50mm, Shaft Diameter:, 3.17mm, Shaft Length:, 15mm, Weight:, 170g, EZRUN-3650 9T Sensorless Brushless Motor:, Top quality materials:, u,
Brushless motor 1pcs EZRUN -60A-SL ESC Features for Compatible with ...SDSHobby
TWO IN ONE AUTO IGNITION FOR NITRO ENGINE
| working voltage | 4.2—13V |
| operating current of the igniter | 0-5A |
| output voltage of the igniter | 1.5V |
| Weight | 20g |
| Volume | 35mm ( L ) * 17mm ( W) * 8mm ( H ) |
Technical parameters:, Product features:, If you want to change the voltage detect value, please do as follows:, 1), Attentions:,
Buzzer prompts ignition status ( buzzer sound is loud or ...SDSHobby
THREE IN ONE UBEC/CDI SWITCH FOR GASOLINE ENGINE
| CDI in | 6-13V |
| CDI out | 5.2V/0 |
| Weight | 15g |
| Volume | 35mm |
Technical parameters:, Product features:, How to set the voltage in 4.8V or 6V:, The default detect voltage is 4.8V while leave the factory. If the receiver uses 4 ni-mh batteries, please choose 4.8V voltage for detecting. If the receiver uses 5 ni-mh batteries, please choose 6V voltage for detecting, If you want to change the voltage detect value, please do as follows:, 1. Turn off the receiver’s power., Attentions:,
-5A (L)* 17mm ((W)* 8mm (H ) Integrated CDI remote ...SDSHobby
TREX 450PRO/ VWINRC 450PRO FBL/FLYBARLESS ELECTRIC HELICOPTER KITS SHAFT DRIVE (WITHOUT CANOPY, MAIN PROP)
Specifications:, Length:, 635mm, Height:, 30mm, Main Rotor Diameter:, 710mm, Tail Rotor Diameter:, 158mm, Motor Pinion Gear:, 14T, Main Drive Gear:, 150T, Autorotation Tail Drive Gear:, 106T, Tail Drive Gear:, 5T, Drive Gear Ratio:, 1: 11.5: 4.24, Weight (without main blade):, 450g, Flying Weight (with battery):, about 780g, Recommended Equipments (need to buy separately):, Fiberglass Canopy:, 1pcs, Fiberglass Prop:, One pair, Radio Set:, 6 channels 2.4G, Motor:, 3800KV, Servo:, (MG90)14g metal gears analog servox3pcs; S9257 25g locked tail servox1pcs, ESC:, 40A, 1pcs, Battery:, 11.1V/ 2200MAH/ 25C Lipo, Gyro:, 1pcs, Charger:, 1pcs IMAX Compact balance charger, Features:, Note:, This product is only a frame, not including the canopy, main propeller and electronic equipment. It is material benefit DIY product for player.,
New high stability of the main Propeller holder Integrated Swash ...SDSHobby
TREX ALIGN/VWINRC 450 SPORT FLYBAR ELECTRIC HELICOPTER KITS BELT DRIVE (WITHOUT CANOPY, MAIN PROP)
Specifications:, Length:, 635mm, Height:, 10mm, Main Rotor Diameter:, 710mm, Tail Rotor Diameter:, 158mm, Motor Pinion Gear:, 14T, Main Drive Gear:, 150T, Autorotation Tail Drive Gear:, 106T, Tail Drive Gear:, 5T, Drive Gear Ratio:, 1: 11.5: 4.24, Weight (without main blade):, 450g, Flying Weight (including battery):, about 780g, Recommended Equipments (need to buy separately):, Fiberglass Canopy:, 1pcs, Fiberglass Prop:, One pair, Radio Set:, 6 channels 2.4G, Motor:, 3800KV, Servo:, (MG90)14g metal gears analog servox3pcs; S9257 25g locked tail servox1pcs, ESC:, 40A, 1pcs, Battery:, 11.1V/ 2200MAH/ 25C Lipo, Gyro:, 1pcsx E-TECH G105 head locked gyro, Charger:, 1pcs IMAX Compact balance charger, Features:, Note:, This product is only helicopter frame, not including the Canopy, Main Propeller and Electronic Equipment. It is material benefit DIY product for player.,
Training kit x 1 Pitch meter x 1 Stronger main ...